What are the advantages of laser cutting technology?

First, high precision: positioning accuracy 0.05mm, repeat positioning accuracy 0.02mm.

Second, the slit is narrow: the laser beam is focused into a very small spot, so that the focal point reaches a very high power density, the material is heated to the degree of vaporization and evaporation to form a hole. With the relative linear movement of the beam and the material, the hole is continuously formed into a very narrow width of the slit. The width of the incision is generally 0.10-0.20ram.

Third, the cutting surface is smooth: the cutting surface is burr-free, and the surface roughness of the kerf is generally controlled within Ral2.5; A.

Fourth, fast speed: cutting speed up to lOm/min, the maximum positioning speed up to 70m/min, much faster than the speed of wire cutting.

Fifth, good cutting quality: no contact cutting, cutting edge is very little affected by heat, basically no thermal deformation of the workpiece, completely avoid the collapsed edge formed when the material punching and shearing, cutting seam generally does not require secondary processing.

Sixth, no damage to the workpiece: the laser cutting head will not be in contact with the surface of the material, to ensure that the workpiece is not scratched.

Seventh, not affected by the hardness of the material to be cut: the laser can process steel plate, stainless steel, aluminum alloy plate, carbide, etc., no matter what kind of hardness, can be cut without deformation.

Eighth, not affected by the shape of the workpiece: laser processing flexibility is good, you can process any graphics, you can cut tubes and other profiles.

Ninth, it can cut and process non-metals: such as plastic, wood, PVC, leather, textiles and organic glass, etc.

Tenth, save investment in molds: laser processing does not require molds, no mold consumption, no need to repair molds, saving time to replace molds, thus saving processing costs and reducing production costs, especially suitable for processing large products.

Eleven, save material: using computer programming, you can cut the whole board material sets for products with different shapes, maximizing the utilization rate of materials.

Twelve, shorten the new product manufacturing cycle: new product trial, the number of small, uncertain structure, at any time will change ', simply can not be out of the mold, laser cutting machine greatly shortened the new product manufacturing cycle, reducing the mold input.